Getting Your Home Dry After Water Damage

Water damage can wreak havoc on your home and property, whether it is caused by a little leak or serious flooding. If possible, you should contact a professional water damage repair company promptly to assist you in cleaning up the property. This may not always be achievable, since you may have other priorities, such as the wellbeing of your family. In these instances, you should be prepared to address the matter on your own, as well as prevent future situations. Notably, every homeowner should be familiar with the basics of water damage repair. This is why we created this blog article - to discuss how to effectively dry wet areas in your home.

Know The Different Types Of Water Damage

Water damage repair requires an understanding of the many types of water damage and how each type reacts.

• First, there are the superficial types of water damage and the damage they do to the surface. Water damage repair, for example, is a way simpler when the damage is to the softer, absorbent surface materials, such as carpets and upholstery. On hard surfaces such as tile and stone, water damage repair seems to be more challenging.
• Second, there are indirect types of water damage, which cause damage to the building's hidden parts. Indirect water damage occurs when a pipe bursts and the floor above sinks in due to wet floor joists.
• Third, there are the structural damage types. A flood that overtops a drainage basin or spills over the ground near the foundation might cause two types of damage to the structure. Indirectly, it will saturate the earth beneath the foundation, rendering the footings incapable of supporting the building adequately. Indirectly, this will result in the earth beneath the foundation sinking, placing pressure on the foundation walls.
• Fourth, there are types of water damage that are undetectable, such as mold. Mold growth is a result of excess moisture. Mold issues are notoriously difficult to detect, which is why the majority of people have them.
  

Water damage repair, like many other instances, is solved easily by an understanding of the many types of water damage.

Type of Water

Before you begin water damage repair, you must determine the source of the water. When you have a flooding problem in your house, there are three sorts of water to be aware of.

1. Clean Water - This water, which is generated by rain or leaking pipes, is free of dangerous chemicals and is completely safe to handle.
2. Gray Water - Gray water that leaks from appliances such as your dishwasher, toilet, or washing machine may be somewhat polluted. You may clean this yourself with the necessary procedures.
3. Black Water - Blackwater is the most dangerous type of water and originates from sewers or floods from a nearby water source, such as a river. It frequently poses health risks and is dangerous to handle.

Here Are Some Tips On How To Effectively Dry Areas In Your Home:

After doing a thorough assessment of the problem, consider the following water damage repair tips to expedite the process. It is critical to remember that wet materials begin to grow mold after 24 hours, therefore there is no time to waste!

1.  Disconnect Outlets

When you detect water damage in your house, the first thing you should do is quickly disconnect any electronics. While you may not be able to see the extent of the water damage at this point, it is critical to exercise caution around appliances and gas lines. Regardless of the scenario, using this equipment might result in electrical shocks or even explosions.

2. Inspect Mold

Certain mold strains are poisonous to humans and can be dangerous to one's health. Mold may spread fast after it has infested an area, which is why it is in your best interest to examine for growth to minimize any health problems. For minor difficulties, you can quickly cut out the damaged area, bag it, and dispose of it. However, if you have a severe mold infestation, you should immediately shut off all airflow to prevent contamination and then contact a mold specialist. Mold frequently appears inside walls or floors, thus it is critical that this check continues throughout the water damage repair process.

3. Dry Water Out

Prior to further damage, you must remove any moisture and completely dry off the damaged areas. To circulate air and dry up the carpet, wood, and other surrounding materials, you can use fans or a large-capacity dehumidifier. While this will not completely prevent mold growth, properly drying the area will help mitigate the damage.

4. Remove Damaged Materials

If porous materials such as insulation or carpet become saturated with water, they must be disposed of quickly to avoid mildew. It is critical to begin with the ceiling and flooring. This requires addressing and replacing unsealed cement, drywall, and wood in order for the home's structure to handle water damage repair.

5. Disinfect Remaining Areas

Depending on the type of water, it may include a high number of bacteria and other contaminants that might cause health concerns. The water may also promote mold development, thus it is critical to sterilize promptly. After removing the damaged items, you'll want to cleanse the whole area before beginning the repair procedure. Before continuing with the repairs, spray and wash off the surfaces with bleach to prevent mold spores from growing.

While water damage may be extremely stressful for homeowners, with the proper procedures, it is possible to restore your house to normal. To minimize any health risks, it's critical to carefully examine the issue before proceeding with your own water damage repair.

A Water Damage Repair Company Serving Utah

Call Swift Restoration and Remodeling now at (385) 412-8633 for 24 hour water damage repair, fire damage restoration, or mold treatment, or receive a quick quotation from our website. Our Water Damage Repair team will come to your Utah house in 30 to 60 minutes.